certification
OPSS issues high-risk safety report on Kingsway SOLO smoke-rated fire doorsets
The Office for Product Safety and Standards says some SOLO FD30S and FD60S single action doorsets were not fitted with the necessary smoke seals, and Kingsway Group is fitting them at no cost.

The Office for Product Safety and Standards (OPSS) has published a high-risk product safety report on Kingsway SOLO FD30S and FD60S single action doorsets, saying some were not fitted with the necessary smoke seals.
The report, published on GOV.UK on 18 November 2026 under notification number 2611-0072, rates the hazard as a high risk of fire through smoke spread. The lead authority is Local Authority Trading Standards.
OPSS said the affected doorsets did not perform as declared on smoke control as 30 and 60 minute doorsets. Only the smoke-control "S" suffix variants of the SOLO range are affected.
The manufacturer, named by OPSS as Kingsway Group, has started a modification programme to fit the correct smoke seals where they are missing. OPSS said affected customers have been contacted and that the work will be carried out by Kingsway at no cost.
The hazard
OPSS described the product as a smoke rated single action fire door with a wood frame and wooden leaf, made in the United Kingdom.
Without smoke seals, the regulator said, smoke may pass through the gaps around a closed door in the early stages of a fire. Where a doorset protects an escape route such as a stairway, lobby or corridor, OPSS said this could let smoke into that route while people are leaving the building and impair or delay an evacuation.
Where the seals are missing, OPSS said the products may not meet the requirements of the General Product Safety Regulations 2005. Regulation 5 of those regulations, published on legislation.gov.uk, states that no producer shall place a product on the market unless it is a safe product.
Advice to building operators
OPSS said Responsible Persons for fire safety at each affected site are advised to consider the issue as part of the site's fire risk assessment.
Until each doorset has been inspected, the manufacturer advises that doors are kept closed and that self-closers are checked to make sure they are working properly.
Customers who believe they have an affected product but have not been contacted, or who want further information, should email Customer.Service@kingswaygroup.co.uk quoting reference KG-PSN-2026-01.
Modification, not recall
The notice is a product safety report rather than a product recall. Under GOV.UK's own definitions, product safety reports cover specific products found in the UK where corrective measures other than a recall have been ordered by an authority or undertaken by a business. Product recalls, by contrast, apply to products sold in the UK and may require consumers to act to receive a free replacement, repair or refund.
OPSS describes its primary purpose as protecting people and places from product-related harm.
The product
Kingsway markets the SOLO on its website as an anti-ligature complete door system designed to meet single action doorset requirements. The company says the SOLO is available in FD30S and FD60S specifications, uses 44mm or 54mm tri-laminate hardwood door cores, and is supplied as a pre-assembled doorset complete with its frame, with a choice of concealed transom closers.
The company
Kingsway says on its website that it has worked alongside healthcare teams, architects and industry professionals for almost two decades, has helped deliver more than 10,000 projects worldwide and employs more than 100 people. Its UK headquarters and production facility is Helix, a 32,000 sq ft purpose-built building.
OPSS names the manufacturer only as Kingsway Group. Companies House lists Kingsway Group Global Limited, company number 11183199, registered at Unit 1 Helix Logistics Park, Edgington Way, Sidcup, DA14 5BN, with its nature of business recorded as activities of production holding companies.
The OPSS report carries the recall/alert date of 18 November 2026, and customer enquiries to Kingsway should quote reference KG-PSN-2026-01.
Sources
- Office for Product Safety and Standards (GOV.UK) (opens in a new tab) (accessed 2026-11-18)
- Office for Product Safety and Standards (GOV.UK) (opens in a new tab) (accessed 2026-11-18)
- GOV.UK (opens in a new tab) (accessed 2026-11-18)
- Kingsway Group (opens in a new tab) (accessed 2026-11-18)
- Kingsway Group (opens in a new tab) (accessed 2026-11-18)
- Companies House (opens in a new tab) (accessed 2026-11-18)
- legislation.gov.uk (The National Archives) (opens in a new tab) (accessed 2026-11-18)
This story was researched from the primary sources above and checked against them before publication. Spotted an error? Tell us and we will correct it promptly.