Tuesday, 17 November 2026
Newsletter Building Products Today Directory

certification

Four trade bodies issue joint guidance on waterproofing rooflights on flat roofs

NFRC, LRWA, the Rooflight Association and SPRA have produced guidance note GN87 on detailing the junction between flat-roof waterproofing and rooflights, which NFRC calls a common area of weakness.

Flat green roofs planted with grass, with glazed rooflights set into them, above a cobbled courtyard.
Photo: Chad Stembridge via Unsplash

Four roofing and rooflight trade bodies have jointly produced guidance on waterproofing around rooflights and roof windows on flat roofs, the National Federation of Roofing Contractors (NFRC) announced on 16 November.

NFRC, the Liquid Roofing and Waterproofing Association (LRWA), the Rooflight Association and the Single Ply Roofing Association (SPRA) developed the document together. NFRC has published it as guidance note GN87, which its resource library dates to 10 November.

NFRC said the note is aimed at designers, specifiers and contractors. Its GN87 page describes the junction between the roof waterproofing and the rooflight or roof-window assembly as a common area of weakness, and says the note offers practical advice on designing and installing these junctions.

What the guidance covers

According to NFRC, the guidance explains how membrane laps and reinforcement can create uneven surfaces beneath rooflight frames, which can affect seals, fixings and drainage.

It covers upstand dimensions, corner detailing, proprietary kerbs, flashings and insulation continuity, across a range of rooflight and waterproofing systems.

NFRC said the central message is that rooflight and waterproofing details must be coordinated before installation, following the requirements of both the rooflight and the waterproofing manufacturers. There is no universal detail suitable for every arrangement, the federation said.

Recommendations for site

The practical recommendations, as set out by NFRC, include resolving conflicting details before work starts, checking finished upstand dimensions, and inspecting and photographing the completed waterproofing before the rooflight is installed.

The guidance also says required membrane layers should never be removed simply to create a flatter surface, and that rooflights should not be forced onto uneven upstands by overtightening fixings.

NFRC said that by drawing on expertise from across the roofing and rooflight sectors, the guidance supports better coordination between designers, manufacturers and installers, with the aim of reducing avoidable defects and improving the long-term performance of these interfaces.

The bodies involved

NFRC was established in 1892 and describes itself as the largest roofing trade association in the UK. It says its membership covers more than 1,500 roofing companies, made up of specialist roofing contractors, manufacturers and distributors of roofing products and systems, and service providers to the sector.

The LRWA describes itself as the authoritative voice for liquid roofing and waterproofing in the UK.

SPRA, established in 1992, describes itself as the voice of the single ply roofing industry and says it brings together all parts of the single ply supply chain as one body.

The Rooflight Association describes itself as the trade association representing the UK's rooflight industry. It was formerly NARM, the National Association of Rooflight Manufacturers, and in 2023 it rebranded and opened its membership to rooflight installers.

The title of the document differs between NFRC's pages: the news item calls it "Waterproofing interfaces at rooflights and roof windows on flat roofs", while the resource-library entry and the PDF are titled "GN87 Rooflights and Roof Windows on Flat Roofs". GN87 is available through NFRC's resource library.

Sources

  1. NFRC (opens in a new tab) (accessed 2026-11-16)
  2. NFRC (opens in a new tab) (accessed 2026-11-16)
  3. NFRC (opens in a new tab) (accessed 2026-11-16)
  4. The Rooflight Association (opens in a new tab) (accessed 2026-11-16)
  5. Liquid Roofing and Waterproofing Association (LRWA) (opens in a new tab) (accessed 2026-11-16)
  6. Single Ply Roofing Association (SPRA) (opens in a new tab) (accessed 2026-11-16)

This story was researched from the primary sources above and checked against them before publication. Spotted an error? Tell us and we will correct it promptly.

Get stories like this every Friday

The Building Products Today weekly: the week's building materials and product news in one email, free, and the TC Media Group monthly edition. Unsubscribe in one click.

By subscribing you agree to receive the Building Products Today weekly and the TC Media Group monthly edition. We confirm your address first. Privacy.

More from Building Products Today