product launches
IG Masonry Support takes exclusive supply of fischer FCFcl Plus cavity fire barrier
The Keystone Group company will supply fischer's Cavity FireStop Clad FCFcl Plus alongside its masonry support systems, giving specifiers one source for both elements of the slab edge.
IG Masonry Support has become the exclusive supplier of fischer's Cavity FireStop Clad FCFcl Plus closed state fire barrier for masonry buildings in England, Scotland and Wales, the company announced on 16 November.
IG said the partnership means specifiers and contractors can now obtain fire barriers and masonry support from a single supplier. Until now, it said, the two elements have usually been designed and sourced separately.
According to IG, fischer developed the FCFcl Plus after market research into the problems contractors face with existing fire barriers. The result, the company said, is a friction-fit barrier with a single fixing.
Andy Neal, managing director of IG Masonry Support, said: "The partnership grew out of listening to contractors, who've traditionally had to design and source their masonry support and fire barriers separately."
Neil McMahon, head of project sales at fischer, said: "FCFcl Plus brings fischer's fire-safety engineering and certification, while IG brings its masonry support expertise." He said that for fischer, having the right partner in the UK was as important as offering the right solution, and described the arrangement as more than distribution.
The product
IG's product page describes each FCFcl Plus unit as a single solid stone wool core cut to a fixed size and wrapped in aluminium foil. fischer's own UK page describes it as a one-piece closed-dimension stone wool core that can be used for vertical and horizontal linear joints and for rainscreen and brickwork façades without compression. fischer lists use at concrete slab edges where masonry support brackets are fixed among the product's advantages.
IG said the barrier has been tested with its masonry support systems and can be fully penetrated by them. In cavities up to 300mm, the company said, the barrier can be fully penetrated by masonry support using a bracket installation. In cavities up to 350mm, partial penetration is permitted with a bracket installation.
According to IG, the product has been tested to EN 1366-4, EOTA TR031 and EN 1364-4, and its performance is covered by European Technical Assessment ETA-23/0167. IG said the product supports compliance with Approved Document B of the Building Regulations, and that no damp-proof course (DPC) membrane is needed on the face of the barrier, as it has been tested with fischer aluminium foil tape instead.
The two companies give different fire resistance figures. IG Masonry Support's product page lists the FCFcl Plus as up to E 120, while fischer's UK product pages give up to E 240 and EI 180 for the same 120mm product. fischer lists the 120mm variant at 1,200mm by 1,200mm by 120mm with 27 dB acoustic performance.
The territory of the exclusive arrangement is also described differently. IG's announcement and product page say masonry buildings in England, Scotland and Wales, whereas the Keystone Group's slab edge page says the product is supplied exclusively by IG Masonry Support for high-rise brick buildings in the UK.
The slab edge offer
Neal said the fire barrier is the final piece of the slab edge offer for the Keystone Group, of which IG Masonry Support, IG Lintels and Keyfix are all part. He listed masonry support, non-combustible cavity trays and lintels, wall ties and fixings, brick slip systems and now fire barriers as elements designed as one integrated façade solution.
The Keystone Group's own slab edge page presents the zone as combining those five product groups from one supplier. The group says Gateway 2 under the building safety regime requires façade coordination to be resolved and defensible before submission.
The Keystone Group describes itself as one of the largest family-owned manufacturers of construction products in the UK and Ireland. It has grown from the launch of Keystone Lintels in 1989 to nine core brands and employs more than 2,000 people.
Sources
- IG Masonry Support (opens in a new tab) (accessed 2026-11-16)
- IG Masonry Support (opens in a new tab) (accessed 2026-11-16)
- fischer fixings (UK) (opens in a new tab) (accessed 2026-11-16)
- fischer fixings (UK) (opens in a new tab) (accessed 2026-11-16)
- Keystone Group (opens in a new tab) (accessed 2026-11-16)
- Keystone Group (opens in a new tab) (accessed 2026-11-16)
This story was researched from the primary sources above and checked against them before publication. Spotted an error? Tell us and we will correct it promptly.